First Look, Unlocked ZTE MF62 3G Router
ZTE MF62 FAQ & Troubleshooting
The ZTE MF62 Mobile Hotspot 4G router provides On-the-go internet connectivity via Wi-Fi for up to 8 wireless devices SMS service, support HSPA+/HSUPA/HSDPA/UMTS 2100/850 MHz EDGE/GPRS/GSM 1900/1800/900/850MHz. it’s Unlocked for any Global GSM Carrier, in the operating frequencies, with a data broadband activated SIM Card, it has extreme download speed! up to 21.6Mbps Up: 5.76Mbps. Support for micro SD card of up to 32 GB. Support external antenna. Buy it now from the most professional store online, it’s Get3GNet.com of course.
I cannot access the internet at all with the ZTE MF62, why?
Check the LCD display which shows the number of active connections. If this is 0 or x then Wi-Fi is not connected. Verify your password is correct. Make sure your SIM card is inserted correctly. Check you have network coverage in your area. Check that your SIM card is active and enabled with data services. Please wait 1 – 2 minutes for the router to initialize.
The ZTE MF62 download or upload speeds are very slow. Why?
The speed is dependent on signal strength. Check your signal strength and network type.
The ZTE MF62 signal strength is always low. Why?
This indicates poor reception. Try moving the router to another location nearer the window. You can purchase an external antenna with connector type TS9 at get3gnet.com to improve your signal strength.
I secured my router and have lost my password of ZTE MF62. what can I do?
Reset your router to factory defaults to erase all stored passwords and encryption settings. From the powered up state: Press the power key and the WPS key simultaneously.
My ZTE MF62/MF60 battery has not charged while in use and connected to the charger. Why?
In low coverage or high data transfer modes the internal temperature of the device can rise above 45?C. In these conditions the battery cannot be charged due to safety limits with Li-ion battery technology.
My ZTE MF62 Wi-Fi device goes to sleep and disconnects.
This is dependent on the other devices, ie your Wi-Fi clients. If the Wi-Fi client (PC or other device) has a Wi-Fi sleep policy then Wi-Fi signals are switched off after a period. With no active Wi-Fi connections your wireless router will go into low power mode. To maintain an ‘always on’ service make sure you have a Wi-Fi device connected to your router.
ZTE MF60 VS. ZTE MF62
Both MF60 and MF62 are high speed router with 21.6mbps downlink speed. The main difference is the look, the MF62 comesin a new design fresh look. Also the MF62 supports 2100/850 MHz frequency bands over the 3G network while the MF60 working on (WCDMA) – 850/1900/2100MHz.
Full information, User Manual, Review, Quick Start Use, specification, FAQ, Troubleshooting at Get3GNet.com webstore.
Published: March 2, 2012, 18:55 | Comments Off on First Look, Unlocked ZTE MF62 3G Router